Commercial and Contract flooring throughout London, South West London and Surrey.
Commercial Flooring
Please take time to wait while we are updating this section of our website to offer the best possible solutions to your business flooring projects.
However please don't hesitate to call our Contract flooring department on; 0208 243 8702
Start to finish installation of LVT flooring.
Start to finish of installation of LVT flooring.
Stage 1.
After removing the existing flooring and going back to the raw subfloor a coating of recommended primer is applied and once cured it will be then ready to move to the next stage .
Stage 2.
A latex smoothing compound of up to 3mm each application is applied to the subfloor and left for at least 24 hours to dry before it is rubbed down and cleaned to remove any small particles.
Stage 3.
At this stage of the project the flooring is set out to get the correct line or angle required prior to being installed using the recommended pressure sensitive adhesive. Great care is taken to keep the areas clean.
Stage 4.
Almost there, the flooring is installed and once fully set into the adhesive a coating of protecting sealing solutionis applied followed by a small bead of clear silicone sealant applied to the perimeter.